Drawn Cup Needle Roller Clutch Assembly HF-KF Series

Drawn Cup Needle Roller Clutch Assembly HF-KF Series

  • Drawn Cup Needle Roller Clutch Assembly HF-KF Series
Model No.: HF-KF Series
Payment Type: L/C,T/T
Delivery Time: 30 Days

Product Description

Drawn Cup Needle Roller Clutch Assembly HF-KF Series can be operated directly on a machined shaft of suitable quality, or with a matching inner ring where this requirement cannot be conventionally satisfied.Radial needle roller and cage assemblies have a steel cage that provides both inward and outward retention for the needle rollers.
Needle Roller Clutch Assembly HF-KF Series  with closed ends and open ends are obtainable in open and closed variants. Owing to the thin-walled external drawn cup and the lack of an internal ring, drawn cup needle roller bearings with a closed end and open ends have a very low radial section height. They contain extremely high load carrying ability, are appropriate for high velocities and can be effortlessly fixed. If snap rings, shoulders, etc., are not used for axial location, the housing bore can be shaped effortlessly and in particular economical.

High Precision Needle Roller Clutch Assembly HF Series

Features

High Precision Needle Roller Clutch Assembly HF-KF Series have a high load carrying capacity in addition to their low cross-section and stiffness. They are especially suitable for bearing arrangements where radial space is limited because needle roller bearings only carry pure radial load and can not limit the axial displacement of shaft relative to the housing. It is important to ensure that inner ring axis and outer ring axis must be aligned during mounting the bearings.

High Precision Needle Roller Clutch Assembly HF-KF Series

Designation Basic Size
Fw mm D mm C mm
HF0306-KF 3 mm 6,5 mm 6 mm
HF0406-KF 4 mm 8 mm 6 mm
HF0612-KF 6 mm 10 mm 12mm
HF0812-KF  8 mm 12 mm 12 mm
HF1012-KF 10 mm 14 mm 12mm


http://www.ritbearingchina.com
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-3000 characters
Post Sourcing Request >>